Pipeline flowmeter
Ultrasonic flowmeter HD-TUF420
- Accuracy: ≤ 0.5%
- Velocity range: 0-10m/s, measured in both forward and reverse directions
- Sensor types: external clamp type, plug-in type
- Pipeline diameter: DN50-DN6000mm
- Product description: Ultrasonic flow meter is an instrument that measures the liquid flow rate inside a circular tube based on the principle of time difference method. It adopts advanced multi pulse technology, signal dig
-
Product Introduction
Ultrasonic flow meter is an instrument that measures the liquid flow rate inside a circular tube based on the principle of time difference method. It adopts advanced multi pulse technology, signal digital processing technology, and error correction technology, making the flow meter more adaptable to the industrial environment, and measuring more convenient, economical, and accurate. The product has reached advanced levels both domestically and internationally, and can be widely used in fields such as petroleum, chemical, metallurgy, power, water supply and drainage.
Ultrasonic flow meter is a non-contact instrument that can measure the flow rate of medium with large diameter and can also be used for measuring medium that is difficult to contact and observe. Its measurement accuracy is very high, and plug-in installation can achieve a maximum accuracy of ± 0.5%, almost unaffected by various parameters of the measured medium, especially solving the flow measurement problems of strong corrosive, non-conductive, and flammable and explosive media that other instruments cannot.
Functional characteristics
※ The installation is very convenient, without the need for cutting pipes, making it more suitable for a wider range of applications.
※ Ultrasonic flow meters can provide very low flow measurement for process control.
※ High precision measurement, with a maximum measurement accuracy of 0.5%.
※ The protection level of the sensor can reach IP68.
※ Wide measurement range, capable of measuring pipes with a diameter of DN50-DN6000.
※ Multiple installation methods for the host: wall mounted, rail mounted, etc.
※ Equipped with 3 signal input interfaces, it can expand the access of other sensors.
※ The cost of use is low, and compared to other types of flow meters, ultrasonic flow meters have a higher cost-effectiveness.
Technical parameter
Specification and model: HD-TUF420
Measurement accuracy: ≤ 0.5%
Flow rate range: 0-10m/s, measured in both forward and reverse directions
Pipeline diameter: DN50-DN6000mm
Sensor types: external clamp type, plug-in type
Fluid temperature: -30-160 ℃
Fluid types: water, seawater, sewage, various oils, single and uniform liquids that can conduct ultrasonic waves
Pipeline materials: Steel, cast iron, copper, PVC, aluminum, fiberglass, etc., with lining allowed
Signal output: 4-20mA
Signal input: 3 channels 4-20mA
Communication interface: isolated RS485 serial interface, supporting MODBUS protocol
Power supply method: DC8-36V
Protection level: host IP65, sensor IP68
Working temperature: host -20-60 ℃, sensor -30-160 ℃
Working humidity: ≤ 80% RH
∷
